Wilson Electronics AG SOHO 65 Dual Band Signal Booster Amplifier 805045

Wilson Electronics AG SOHO 65 Cell Phone Signal Booster Amplifier 805045

Wilson AG SOHO 65 Specification Sheet (PDF file)


Wilson 805045 AG SOHO 65 Adjustable Gain (60 dB cellular/65 dB PCS) cellular/PCS signal booster amplifier significantly improves the performance of your cell phone or cellular data card in small to medium size building applications.

The Wilson AG SOHO 65 supports multiple cell phones and data cards simultaneously, and works with all major North American cell phone carriers, which include both Cellular (824-894 MHz) and PCS (1850-1990 MHz) carrier frequency bands. Except iDEN/Nextel and 1700MHz AWS (T-Mobile US 3G).

Wilson AG SOHO 65 signal booster amplifier can be paired with a wide variety of Wilson indoor and outdoor antennas for a truly customized system. Depending on outside signal strength, the Wilson AG SOHO 65 can improve cellular strength in a single room or an entire home.

Features

• Adjustable Gain
• Greatly reduces dropped calls, extends signal range, and increases data rates
• No physical connection to your cell phone or data card
• Allows multiple phones and cellular data cards to be used simultaneously
• Oscillation (or interference) detection and automatic shutdown with auto reset
• Overload protection circuit – protects cell towers from being overloaded
• Amplifies signals both to and from the cell tower
• Maximum 1500 milliwatts output power - As much as 15 times more powerful than a typical cell phone
• Works on all generations of CDMA, TDMA, GSM, and 3G
• AT&T, Cricket, Sprint (Except iDEN/Nextel), T-Mobile, US Cellular, Verizon and other
  
• Power control logic ensures maximum gain is within cellular standards
• Extends battery life – Booster enables phone to work at reduced power
• AC power supply included
• FCC and IC type accepted

Specifications

• Frequency 824-894 MHz / 1850-1990 MHz
• Gain 62 dB / 65 dB
• Max Uplink Power 1140 mw / 1114 mw
• Max Downlink Power 26 dBm / 25 dBm
• Noise Figure 3 dB / 4 dB nominal
• Power Requirements 6 V AC / 3 A max
• Connectors FME-Male 50 ohms

Includes:

• All mounting hardware
• AC power supply
• Installation Guide
• Receiver sensitivity -108dBm, CDMA FER 1/2%
• Up to 2 watts power amplifier
• FCC and IC type accepted

Important Information Regarding Coverage: Coverage is dependent upon the strength of the signal received from the tower at the outside antenna. At the location that the outside antenna is mounted a signal strength of at least 3 bars is required. Use of a high-gain directional antenna for the outside antenna improves coverage area.

Wilson AG PRO 65 Dual Band Signal Booster