Wilson DataPro Direct Connect Cellular Signal Booster for M2M - 811225

The DataPro 811225 Direct Connect Signal Booster is Wilson Electronics’ first cellular signal booster developed specifically for M2M (Machine to Machine) installations. The dual-band DataPro is ready to integrate with CDMA modem installations to provide strong, reliable cellular signal that ensures successful M2M data transfer. This product works on all North American CDMA networks.

The Wilson Cellular DataPro (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both 800MHz and 1900MHz cellular and PCS signals providing up to 3 Watts of output power on the 800MHz band and 2 Watts of output power on the 1900MHz (PCS) Band.

Features:

• Significantly improves data transfer rates and reduces resending of data
• Compatible with all North American CDMA cellular technologies
• Bi-directional signal booster amplifies signals both to and from the cell tower
• Configurable to fit virtually any M2M installation
• Power control logic ensures maximum output power is within cellular network standards
• FCC and IC type accepted
• DataPro Connect 811225 works on all North American CDMA networks

Wilson 811225 M2M Signal Amplifier Installation Manual (PDF File)

Specifications

Frequency:	824-894 MHz / 1850-1990 MHz
Gain:	12dB
Nominal power output (850MHz/1900MHz):	CDMA 28.9 dBm/31.8 dBm
Power Required	5V DC, 1A
Dimensions:	3.3 x 1.9 x .8 inch (8.4 x 4.8 x 2.0 cm)
Impedance:	50-ohm
Connectors:	SMA Female

 

Wilson DataPro 811225 M2M Direct Connect Signal Booster