Browse by Manufacturer
Browse Categories

Wilson 811201 Dual Band Direct Connect M2M Signal Booster

<< Previous in Wilson Amplifiers and Chargers Next in Wilson Amplifiers and Chargers >>

Price: $269.99
Out of Stock
Item Number: 477730
Manufacturer: Wilson Electronics
Manufacturer Part No: 811201
Condition: New
Packing: OEM Packing

Wilson 811201 Dual Band Signal Booster Amplifier

Wilson Direct Connect Cell Phone Signal Booster connect directly into your cell phone through a cable and adapter, and improve signals directly into your cell phone or cellular data card, giving you maximum signal performance for rural or remote locations.

Wilson 811201 Direct Connect booster amplifier can be used in a car, boat, and in-building, and require an outside antenna and a phone-specific antenna adapter.

Each Direct Connect Booster System contains a Signal Booster, a 6-foot extension cable which connects to an antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter.

Wilson signal booster 811201 can also use for M2M communication. ATMs, medical devices, industrial machines, smart meters, and digital billboards are just a smattering of M2M devices; they constantly share information wirelessly with other machines and servers, streamlining efficiency and effectiveness.

The Wilson dual band direct connect amplifier is designed for all cellular systems including AMPS, CDMA, EDGE GPRS, GSM and TDMA.

Includes 12VDC cigarette lighter plug cable and 6' phone adapter extension cable with FME female ends.


  • Connects directly to cell phone with a Wilson antenna adapter
  • Greatly reduces dropped calls, improves cell phone signal, and increase data rates
  • Direct Connect boosters do not cause oscillation
  • Overload protection circuit – protects cell towers from being overloaded
  • Amplifies signals both to and from the cell tower
  • Maximum 3000 or 5000 milliwatts output power - As much as 20 times more powerful than a typical cell phone
  • Works great in mobile, in-building and marine applications
  • Power control logic ensures maximum output power is within cellular network standards
  • Extends battery life – Booster enables phone to work at reduced power
  • FCC and IC type accepted
  • The models are listed in the specifications section with frequency information
Product Number

824-894 MHz /1850-1990 MHz

10 dB / 14 dB
Max Uplink Power
2240 mw / 930 mw
Max Downlink Power
0 dBm / 0 dBm
Noise Figure
3.5 dB nominal
±2 dB
Power Requirements
12 V,0.5-1.5 A max
FMe-Male 50 ohms
5.4 x 4.3 x 1.4 (inches) 14.0 x 10.8 x 3.5 (cm)
1.32 lbs / 0.6 kg

Wilson 811201 Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier

Related Products

Wilson M2M DataPro Direct Connect Signal Booster Amplifier 811225
Price: $122.99
Wilson M2M DataPro Direct Connect Signal Booster Amplifier 811225
DataPro Connect 811225 is Wilson Electronics' first cellular signal booster developed specifically for M2M Applications. The dual-band Wilson DataPro Direct Connect is ready to integrate with nearly any CDMA modem installation.
free shipping tax free