| | |
|
| |
| | |
|
|
SureCall Fusion5s 2.0 In-Building 5G LTE Signal Booster Amplifier

SureCall Fusion5s 2.0 In-Building 5G LTE Signal Booste SureCall Fusion5s 2.0 Omni/Panel 5G LTE Signal Booste SureCall Fusion5s 2.0 Yagi/Dome 5G LTE Signal Booste SureCall Fusion5s 2.0 Yagi/Panel 5G LTE Signal Booste SureCall Fusion5s 2.0 In-Building 5G LTE Signal Amplifier SureCall Fusion5s 2.0 In-Building 5G LTE Signal Booster SureCall Fusion5s 2.0 5G LTE Signal Booster |
|
Product Options
| Booster Kit: |
|
|
SureCall Fusion5s 2.0 All-Carrier 5G/LTE Cell Signal Booster
Improve 5G and LTE cell signal for all U.S. carriers inside large homes or mid-size buildings up to 10,000 square feet. The SureCall Fusion5s 2.0 boosts voice, text, and data on all 5G/4G phones and devices, including MiFi hotspots and cellular data hubs. It reduces dropped calls and improves data speeds so everyone stays reliably connected — even in the weakest signal environments.
Key Benefits
- Designed for large homes or mid-size buildings up to 10,000 sq. ft.
- Boosts voice, text, and data for all North American carriers
- Supports multiple simultaneous users
- Reduces missed and dropped calls while increasing data speeds
- Works with all cellular devices, including hotspots, and extends battery life
Advanced Performance
- 5G compatible — supports all 5G and 4G LTE devices
- Delivers clear, consistent coverage in weak signal areas
- Designed, assembled, and tested in the USA
- Industry-best 3-year warranty
- Lifetime U.S.-based technical support
Product Specifications
- Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)
- Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)
- Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE, and all cellular standards
- Input/Output Impedance: 50 Ohm
- Maximum Gain: 72 dB
- Max Downlink Power: +13 dB
- Noise Figure: 8 dB
- AC Power Transmitter: Input AC 110 V, 60 Hz / Output DC 12 V
- Maximum Output Power: 1 Watt EIRP
- Cable: SC-400
- RF Connectors: N Female (both ends)
- Power Consumption: < 25W
- Dimensions: 9.25\" x 6.375\" x 1.375\"
- Weight: 4 lb.
- FCC (USA): RSNFUSION5S-X20
Booster Kits Include
All Fusion5s kits include low dB loss SC-400 coax cable for optimal signal performance.
Available Fusion5s Kits
- SC-PolysH/O-72-OD-Kit: Outside omni1 antenna, inside dome3 antenna, plus 30 ft and 75 ft cables.
- SC-PolysH/O-72-YD-Kit: Outside Yagi2 antenna with inside dome3 antenna, plus 30 ft and 75 ft cables.
- SC-PolysH/O-72-OP-Kit: Inside omni1 antenna with inside panel4 antenna, plus 30 ft and 75 ft cables.
- SC-PolysH/O-72-YP-Kit: Outside Yagi2 antenna with inside panel4 antenna, plus 30 ft and 75 ft cables.
Antenna Types Explained
- Omni Antennas: Ideal for sending and receiving signal from all directions.
- Yagi Antennas: Directional antennas that should be aimed toward the strongest signal source.
- Dome Antennas: Provide 360-degree indoor signal coverage.
- Panel Antennas: Offer focused, directional indoor coverage.
|
|
|
SureCall Fusion5s 4G LTE signal booster is designed for homes where cellular reception is weak. SureCall Fusion5s signal amplifier covers multiple users in areas that are up to 6,000 square feet unobstructed.
|
|
| |
|
|