Instructions for Applying Privacy Screens

1. Using the micro fiber cleaning cloth (provided), gently wipe away dust and fingerprints from the phone.
2. Measure the screen of your phone.
3. Cut graph sheet to measured size.
4. Verify the size of the graph sheet on the phone's screen.
5. Cut the Privacy Screen film using the graph as a guide.
6. Peel thick backing from privacy screen (There are two films, remove the thicker one in this step). Once this is done, DO NOT touch the sticky side of the screenguard (bottom). Doing so will leave fingerprints. Handle the screenguard from the sides and top.
7. Line up the privacy screen with the iPod starting from the bottom. Lay the privacy screen down.
8. Using the soft card (provided) smooth out any air bubbles between the screenguard and phone.*
9. Peel the plastic coating from the privacy screen (The thinner film, on the outside of there screen)
10. Follow steps 2-4 when applying the scroll wheel guard (if applicable).

*The Privacy Screen Pro is a self-adhesive polymer that adheres with static electricity and may be removed without leaving a sticky adhesive residue.